Wiper Fluid Not Spraying After Battery Replacement? Uncover the Connection

Remove one of the lines to the hood nozzles, turn on the pump and see if the fluid comes out. The way to unclog hood nozzles is with a straight ... If you hear the motor running (humming) and you have tried to send fluid to both the front and rear windows but no fluid is coming out then the ... You can try back flushing the nozzles with air -- don't use too much air pressure -- and you'll have to disconnect the hose at the nozzle. If ... If there is no fluid coming out after refilling, you may have a clogged nozzle, blow a fuse, or the pump is broken and needs to be replaced. MORE: How to Change ... It sounds like a check valve is not working properly. It would keep the fluid lined fully charged and ready to squirt. I actually don't even ... Check the fuse first. How cold is it where you live? Might just be fluid frozen in the lines. Lastly, check the motor. You can take a couple of ... It's possible that water or wiper fluid that is not rated for cold weather got into the pump and froze if you live in a colder climate. First and most common is that the windshield washer fluid reservoir is empty, or the pump is broken. There are some occasions where the problem ... Not sure if you wrote this above, but an easy way to check if its a clogged/kinked line or a bad pump - try pushing the washer handle to operate ... Rinse the reservoir with forceful tap water. If that doesn't help, then denature any organics with high test Alcohol - vodka or isopropanol - and let it sit ...