BMW Fuel Injector Open Repair Master the Art of Injector Revitalization

The Injector Shop is proud to provide BMW Piezo GDI fuel injectors testing and cleaning for the N54, N63, S63, and N74 engines. Testing is performed using ... You can apply 12v directly to the injector to see if it clicks open. ... fix the bike, it gets expensive getting to the fix. So - check for ... To remove an injector, you have to disconnect the electrical connectors to all the injectors. Then remove the fuel rail with all injectors attached to it. Through a couple of iterations, I've seen the mix of the two injectors at A 80% B 20%. Once, I Disabled each injector to see if each was ... You also can't back measure the ECU output driver. Unplug all injectors. Plug in an old injector and hold it in your hand while cranking. The engine computer (DME in BMWspeak) provides the ground to an injector to make it fire. I'd check the ground side of the injectors ... Vehicle ran really rough, wouldn't really accelerate much in first gear, but I was able to limp to the dealership. Fortunately, they were open Saturday ... The Noid light should blink crisply when the engine is started or cranked over. If the Noid light does not blink, I check the Fuel Injector harness for ... Fuse F2 in the DME box supplies 12 volts to all of the injectors on the red/white wires to all injectors. If you connect your meter to the other ... The new injector needs to be coded to the car. The injectors have groups of digits on the side of them, those numbers need to be entered into ...