Maximize Your E36 M3's Performance The Essential Guide to Rear Spring Pad Thickness

Brian, look like the original spring pads but i need to look deeper to try and find out the thickness of new ones and compare to the ones on ... Get a piece of 5mm thick rubber mat and cut a circular piece that fits above the upper spring seat. That should raise the car about 1/4 inch. Unlike the factory rubber pad, our reinforcement is only 1/8" thick adding very little additional thickness. Made here in the USA, our plates are constructed ... Product Details. BMW used three different spring pads in the E36 E46 3 series, each a different thickness, the thinnest being only 5mm. It is not 1 to 1. The motion ratio for the rear spring is about 0.65 so divide the pad thickness difference by 0.65 and you will get your wheel ... BMW sells rear lower spring pads in 5mm, 7.5mm, 10mm, and 15mm heights. Condor Speed Shop has an adjustable set (up to 14.5mm). Ireland Engineering sells a ... My E36 328 used to lean, I bought a 10mm spring pad from BMW (less than a fiver)and fitted it above the OSR spring. Car now sits level, and ... Why are ZCP car's lower? Based on my findings yesterday and night, ZCP car's use a smaller/thinner spring pad than NON ZCP cars to lower the rear. Based on ... The car's extra-cost content includes a detailed head-up display, customizable ambient interior lighting, heated front and rear seats, remote start, and ... In looking a bit more I think these are the part numbers... URO versions are pretty cheap even for the thicker ones and will probably be just ...