Unveiling P0018 Fuel Pressure Sensor Diagnostic Guide

The mechanic said the code is p0018 bank2 sensor A, also cylinders 2,4,6 are misfiring. Any idea what this could be? Code P0018 means 'Crankshaft Position- Camshaft Position Correlation (Bank 2 Sensor A).' The powertrain control module (PCM) logs this error ... The diag code (P0018) refers to correlation between the crank shaft sensor and the cam shaft sensor on bank 2 (driver side). Bank one will be on the left side, bank two is on the right or nearest the radiator. The cam sensor you are looking for would be between the ... I have a P0018 engine code (Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor A) that I cant seem to track down. Its not associated with any ... This code, has all the symptoms as if the VCT's are bad or something: slight rough idle, low power under heavier acceleration, NO knocking noise or anything ... I have P0018 Crankshaft position in relation to bank 2 intake camshaft (Above upper limit value) with my PIWIS, and it misfires and stumbles at idle. P0018 stands for “Crankshaft Position- Camshaft Position Correlation (Bank 2, Sensor A).” It is set when the camshaft(s) on bank 2 of the engine is not in its ... There are two camshaft position sensors similar in size to sensor shown on the back of the engine for each cylinder bank. Up pretty high behind ... Intermittently showing p0018 code and hesitating under hard acceleration. I tried searching the forums but haven't found anything. Any help/advice/ direction ...