Conquering the Notorious P0018 Error A Mechanic's Odyssey

The OBD-II code P0018 indicates a problem with the camshaft and crankshaft. Find out more with this short but informative guide. My 2016 kia sedona van sx pulling cod P0018, what should I look for. Camshaft and crankshaft position sensor and vvt solenoid maybe the problem? This code is for Bank 2 which I believe is the driver side. I have pulled the VVT solenoids from that bank and cleaned them and they seem to work. The issue is a Check Engine & Traction light, along with NO OVERDRIVE all due to a Traction Management Issue caused by a P0018 DTC. The engine was missing / running rough, and continued to get worse. The check engine light started flashing. The engine stalled when I came to a red light, but ... Try running a Search Forums for P0018. There are 18 matches, none of which sounds good. P0018 points to either a stretched rear bank timing ... knee jerk reaction? water pump/timing chain failure. P0016 and P0018 codes are basically the same animal. bank 1 vs 2. as the timing chain ... P0018 is the OBD-II generic code indicating that the camshaft position sensor A for bank 2 does not correlate to the signal from the crankshaft position sensor. I would guess that you either have a faulty crankshaft position sensor or bad camshaft adjustment solenoid. Both are easy DIY bolt on replacements and not too ... The auto stop start warning starts beeping and the check engine light goes on. These are the codes. Is it a common problem, should I replace the camshaft ...