Troubleshooting with Clarity The P0305 Code Explained

Sounds like it is the fuel injector. Should try and have the injector on cyl #5 tested with a labscope by a mechanic, they can test known good ... It's throwing a pending P0305 (cylinder 5 mis-fire). My question is where is the best place to start to fix this intermittent problem??? Plugs, ignition coil? It was a Cylinder 5 misfire by virtue of the P0305 code. I checked it on my torque app and was getting misfires on that #5. I didn't notice any on any other ... Swap the spark plug and ignition coil from #5 to another cylinder. Clear codes & run, then check codes again. P0305 is a misfire in cylinder number 5. A misfire at start -up like that will dump extra fuel into the exhaust system and then you get the O2 codes. After first checking for codes we found a P0305, P0316 and a ... Since the P0305 was the first code and a cylinder #5 misfire we use ... CEL came on a few blocks later. Took it to autozone got the codes read: P0305, cylinder 5 misfire. Removed the spark plug, it looked fine. 2.9L & 3.0L V6 Tech - P0305 misfire - I've been getting this misfire code for quite awhile now. It first showed up about 4-6 months ago. A code P0305 may mean that one or more of the following has happened: Faulty spark plug or wire, Faulty coil (pack), Faulty oxygen sensor(s), Faulty fuel ... Start the Jeep back up and start moving......at sometime just after this the MIL comes on with the P0305 code. I have never seen a flashing ...