Accurate Oil Level Monitoring Hot or Cold, No Compromise

Maybe 10 minutes or so it will read full on the stick because the oil is hot and expanded. Most car manufacturers recommend checking the engine oil level once the car has cooled down as this is not only safer, but it also allows the oil to settle ... Technically speaking, the oil will expand when warm... But, it's so slight, that it should not even be noticeable on the dipstick. So, don't ... Since the oil level is checked in the reservoir, checking cold may check low. Start the engine and run for a few minutes (Honda recommends about ... Make sure your vehicle is parked on level ground, turned off, and that the engine is cold. Open up the hood of the car and find the dipstick. Remove the ... The oil cooler has a thermostat that opens and releases extra oil from the oil cooler making the dipstick reading correct when hot. My general ... When do YOU check oil levels, cold or warm engine. I usually let it warm up, then let it 'settle' for a few minutes before checking. I found this: Oil expands 0.7% for every 5ºC that it heats up. So the difference between checking at 20ºC and 90ºC is 9.8%. In an engine with 4 ... The dipstick should need a good push when installing indicating a proper seal. ... Push the dipstick completely into the valve cover and quickly ... You want to run the car, warm it up (driving it for 10-15 mins is fine you want some temp in oil too). Park it on level ground. Let it cool 10 mins, then check ...