Unlock the Hidden A Detailed Guide to Removing Plastic Underbody Panels

I bought a 2013 CR-V EX-L, and in an inspection of the underside of the vehicle ... Remove formatting. Strike-through. Font family. Arial; Book ... ... holding a plastic tray to the vehicle's undercarriage? Someone even boasted how the impact wrench he purchased for this purpose has 1,000 ... They're shaped like a U, you just need to flex the bottom part of the tab down to clear the notch holding it on, then pop it off toward the rear ... There are four bolts which hold the back section on. You need to remove it first to remove the front section. The front section is held on ... There's 4 10mm bolts holding it on so perhaps they didn't tighten a few of them down all the way or didn't replace all of them? Cheers,. Ultra ... by the time there is sand and small debris in the thread it can take a while to remove where a regular plastic tab (rivet) would take no more ... I've done some work underneath in which I had to remove those plastic panels. When removed there was a couple of ribs/beams to make the car more ... How do I remove the damaged plastic panel? First, locate the fasteners holding the plastic panel in place. These are usually plastic screws ... Yeah you got to if i recall 6 flathead plastic screws holding the skid plate on the car with two regular screws holding on to the plastic ... Funny, I had read all about this happening to everybody and was thinking that mine was holding up pretty well. ... Remove formatting. Strike ...